Unconfigures the managed address configuration flag value sent in router discovery advertisements on the VLAN.
| vlan_name | Specifies an IPv6 configured VLAN. |
N/A.
This command sets the managed-config-flag parameter to the default value off.
The following example unconfigures the managed address configuration flag for the VLAN "top_floor":
unconfigure vlan top_floor router-discovery managed-config-flag
This command was first available in ExtremeXOS 11.2.
This command is available on the platforms listed for the IPv6 unicast routing feature in the Switch Engine v33.1.1 Licensing Guide document.